MPD85
Precision finishing of aluminum alloys and composite components.
Sharp edges and fine edge integrity for precision machining.
Ask about MPD85 →Home / PCD Inserts / CCMW
Original geometry illustration, not a product photograph. PCD segment layout, hole details and edge preparation require drawing confirmation.
HUAMIN TOOLS / PCD TURNING INSERTS
CCMW PCD Inserts for Aluminum & Non-Ferrous Turning
A rhombic PCD turning insert family for aluminum and selected non-ferrous materials. Compare dimensions, select a specification and request a grade recommendation for your application.
80° rhombic shape7° clearanceISO model references
Build your enquiry
Grade choice is an enquiry preference. Supply and compatibility will be confirmed.
Request a QuoteAsk an Application Engineer01 / SIZE & GEOMETRY
Find your CCMW specification.
Reference dimensions in mm. Select a row to carry its model into your enquiry.
| ISO model | IC | t | d | r | LE | Enquiry |
|---|---|---|---|---|---|---|
| CCMW 060202 | 6.35 | 2.38 | 2.8 | 0.2 | 2.4 | |
| CCMW 060204 | 6.35 | 2.38 | 2.8 | 0.4 | 2.4 | |
| CCMW 09T302 | 9.525 | 3.97 | 4.4 | 0.2 | 2.4 | |
| CCMW 09T304 | 9.525 | 3.97 | 4.4 | 0.4 | 2.4 | |
| CCMW 09T308 | 9.525 | 3.97 | 4.4 | 0.8 | 2.3 |
IC: inscribed circle · t: thickness · d: hole diameter · r: corner radius · LE: cutting-edge reference length. Dimensions from the October 2026 PCD catalog are selection references, not confirmed stock or manufacturing tolerances. Confirm the drawing before ordering.
Browse more PCD insert shapes →02 / PCD GRADES
Match the diamond grade to your material.
These are application references for the Huamin PCD range. Confirm the grade, segment layout and edge preparation for this model.
MPD02
Profile and thread turning, non-ferrous components, plastics and wear-resistant parts.
A balance of toughness, edge quality and electrical-discharge processability.
Ask about MPD02 →MPD05
Fine finishing of aluminum alloys, PMMA and precision non-ferrous contours.
Balanced wear resistance and edge quality with good electrical-discharge processability.
Ask about MPD05 →MPD10
General turning and roughing of low- to medium-silicon aluminum alloys; piston components.
A general-purpose balance of toughness and abrasive wear resistance.
Ask about MPD10 →MPD25
High-silicon aluminum, MMC and graphite. Cemented carbide and ceramics require application-specific trials.
Wear-focused grade for abrasive workpieces.
Ask about MPD25 →MPD302
High-silicon aluminum alloys, MMC and bimetallic components; evaluate each constituent material.
Fine and coarse diamond grains combined for balanced edge integrity and wear resistance.
Ask about MPD302 →Tell us about your non-ferrous application.
Aluminum alloys
Include alloy designation, silicon content, finishing allowance, required roughness and burr-control requirements.
Copper, graphite & composites
Identify the exact material, abrasiveness, fillers and interruption level before deciding on grade and edge geometry.
Holder & edge compatibility
Confirm the full insert code, seat and clamp. PCD tip layout, LE and edge preparation must match the operation.
Conventional PCD is generally not selected for steel or cast iron cutting. Mixed ferrous/non-ferrous workpieces need specific review.
View the PCD technical catalog →Questions about CCMW PCD inserts
Will this insert fit my current holder?
Confirm the full ISO code, seat, clearance and clamp arrangement. The family name alone does not confirm compatibility.
How do I choose a PCD grade?
Provide the exact material, aluminum silicon content where relevant, machining operation, required finish and cutting conditions. Select “Please recommend” if unsure.
What does LE mean in this table?
LE is the catalog cutting-edge reference length. Confirm the actual PCD segment layout and usable edge against the product drawing.
Are the listed sizes available in every grade?
These are catalog reference specifications. Confirm the model, grade, quantity and drawing for supply and lead-time information.
Can PCD inserts machine steel?
Conventional PCD is generally not suitable for steel and cast iron cutting. Ask for a separate evaluation of any bimetallic or mixed-material operation.
Can I send a custom drawing?
Yes. Send dimensions, PCD segment requirements, edge preparation and application details for a feasibility review.