Workpiece & target
Define material, allowance and acceptance criteria before choosing the abrasive or geometry.
Grinding & Honing / HM-G13
HUAMIN TOOLS / GRINDING
Tool Clearance & End-Face Grinding
Face and angled wheel forms for cutting-tool clearances and end geometries.
APPLICATION REFERENCE / HM-G13
Application reference, not a stock SKU. Configuration and supply require technical review.
Applications & workpieces.
Drills; end mills; reamers; general rotary cutting tools.
Choose the abrasive for the tool material and verify wheel access at all programmed orientations.
Engineering focus.
Relief and end-face grinding on drills, end mills and reamers requires access through programmed orientations. Include the relief angles and holder collision envelope.
Tool & machine
Review mounting, access and process motion against the actual machine arrangement.
Trial & confirmation
Agree the drawing and evaluation method before comparing finish, wear or process capability.
Define your configuration.
| Configuration item | Information to provide / confirm |
|---|---|
| Application-specific inputs | Clearance angles; end geometry; material; holder envelope and finish. |
| Workpiece | Material designation, hardness, heat treatment and incoming stock |
| Acceptance criteria | Drawing tolerances, form requirements, surface texture and measurement method |
| Wheel & mounting | Shape drawing; outside diameter D, width T, bore H or shank/thread connection, as applicable |
| Abrasive system | Workpiece-dependent abrasive, grain specification, bond and conditioning method |
| Machine & process | Spindle/interface, coolant, dressing arrangement and approved operating limits |
| Quantity & supply | Trial / production quantity; final configuration and availability confirmed after review |
Questions about Tool Clearance & End-Face Grinding
Are these stock product codes?
HM-H and HM-G references identify this application collection, not inventory SKUs. Dimensions, construction, supply feasibility and lead time require confirmation.
What should I send for a quotation?
Send a workpiece and tool drawing where available, material and hardness, machine and interface, stock allowance, finish, tolerance, coolant and quantity.
Does the illustration show the exact supplied tool?
No. Images are AI-generated family illustrations. Geometry, colors and proportions are indicative; the approved drawing defines the actual tool.
Can you confirm machine compatibility?
Provide the actual machine model, mounting interface, spindle or feed arrangement and available clearance. A machine brand alone does not establish compatibility.
How are operating limits confirmed?
Specification and acceptance requirements are agreed for the application. Operating speed follows the approved design and actual tool marking; an illustration is not an operating instruction.
