Workpiece & target
Define material, allowance and acceptance criteria before choosing the abrasive or geometry.
Grinding & Honing / HM-H08
HUAMIN TOOLS / HONING
Single- & Dual-Feed Honing Heads
Head concepts for coordinated rough and finish honing on compatible machines.
APPLICATION REFERENCE / HM-H08
Application reference, not a stock SKU. Configuration and supply require technical review.
Applications & workpieces.
Engine bores; production lines with defined feed and in-process measurement.
Match the head to the actual feed mechanism; dual-feed capability is machine- and design-dependent.
Engineering focus.
Dual-feed concepts depend on independent rough and finish actuation paths and the actual gauging arrangement. A generic head is not automatically compatible with a given machine.
Tool & machine
Review mounting, access and process motion against the actual machine arrangement.
Trial & confirmation
Agree the drawing and evaluation method before comparing finish, wear or process capability.
Define your configuration.
| Configuration item | Information to provide / confirm |
|---|---|
| Application-specific inputs | Feed arrangement; gauging ports; tool envelope; rough and finish stock. |
| Workpiece | Material designation, hardness, heat treatment and incoming stock |
| Acceptance criteria | Drawing tolerances, form requirements, surface texture and measurement method |
| Tool / bore geometry | Bore drawing, depth, entry and exit, blind or through bore and effective contact length |
| Machine & feed | Connection drawing, expansion/feed arrangement, stroke and gauging |
| Abrasive & coolant | Current stone specification, abrasive requirement and coolant conditions |
| Quantity & supply | Trial / production quantity; final configuration and availability confirmed after review |
Questions about Single- & Dual-Feed Honing Heads
Are these stock product codes?
HM-H and HM-G references identify this application collection, not inventory SKUs. Dimensions, construction, supply feasibility and lead time require confirmation.
What should I send for a quotation?
Send a workpiece and tool drawing where available, material and hardness, machine and interface, stock allowance, finish, tolerance, coolant and quantity.
Does the illustration show the exact supplied tool?
No. Images are AI-generated family illustrations. Geometry, colors and proportions are indicative; the approved drawing defines the actual tool.
Can you confirm machine compatibility?
Provide the actual machine model, mounting interface, spindle or feed arrangement and available clearance. A machine brand alone does not establish compatibility.
How are operating limits confirmed?
Specification and acceptance requirements are agreed for the application. Operating speed follows the approved design and actual tool marking; an illustration is not an operating instruction.
